Wynns Alt Humo

  • Maintans Oil Pressure at High Temperatures
  • Improves Performance in Worn Engines
  • Improves Fuel Combustion
  • Improves Lubrication
  • Reduces Sludge and Varnish Formation
  • Inhibits Corrosion
  • Acid Neutralisation
  • Cleaner Engine Components

Packaging


350 ml

Alto Al Humo

Wynn's Alto Al Humo is specially formulated to stop exhaust smoke due to oil burning. Wynn's Alto Al Humo is specially designed for oil burning cars and trucks and has a new improved super thick formula, which is more effective in sealing the gaps between worn internal moving engine parts that cause exhaust smoke due to oil burning.

Wynn's Alto Al Humo is formulated to improve compression for better performance and to quieten most engine noise by providing extra lubrication protection. Wynn's Alto Al Humo contains Wynn's Friction Proofing to reduce friction and wear, and to prolong engine life.

Advantages

Wynn's Alto Al Humo is specially formulated to provide the following advantages:
  • Reduced Oil Consumption
    The chemical polymers and viscosity index improvers combine to increase the resultant oil viscosity and its ability to withstand a broad range of operating temperatures. This improves sealing between the piston ring and cylinder wall as well as taking up slight wear between valves and guides, the most common oil loss areas. Due to the feature of high temperature viscosity improvement, leakage loss around main oil seals is reduced also.
  • Extended Engine Life
    This is achieved as a result of overcoming severe abrasion and metal-to-metal contact. The Wynn's Friction Proofing package actually forms a molecular bond to the surface of the metal particularly when heat, velocity and rubbing friction occurs.
  • Decresed Exhaust Smoke
    By controlling oil consumption, visible exhaust gases are reduced.
  • Decreased Engine Noises
    Wynn's Alto Al Humo provides a cushion between worn parts, helping to reduce engine noises and friction.
  • Reduced Wear
    Wynn's Alto Al Humo helps reduce engine wear resulting from direct metal-to-metal contact under extreme operating conditions such as sustained high speed and trailer haulage.
  • Improved Compression
    Wynn's Alto Al Humo improves the oil viscosity at high temperatures, thereby improving the ring sealing actions and engine compression.
  • Improved Oil Stability
    Wynn's Alto Al Humo retards the oxidation and breakdown of motor oil at high operating temperatures.

Key Benefits

Wynn's Alto Al Humo is a complex formulation of chemical polymers, viscosity index improvers, anti-oxidants, corrosion-inhibitors, anti-foamants and detergent/dispersants. These compounds combine to produce the following additional benefits:

  • Maintans Oil Pressure at High Temperatures
  • Improves Performance in Worn Engines
  • Improves Fuel Combustion
  • Improves Lubrication
  • Reduces Sludge and Varnish Formation
  • Inhibits Corrosion
  • Acid Neutralisation
  • Cleaner Engine Components

Features

  • Maintans Oil Pressure at High Temperatures
  • Improves Performance in Worn Engines
  • Improves Fuel Combustion
  • Improves Lubrication
  • Reduces Sludge and Varnish Formation
  • Inhibits Corrosion
  • Acid Neutralisation
  • Cleaner Engine Components

Technical Data

Appearance Clear Thick Liquid
Colour (Visual) Amber
Colour 2.0 (ASTM D1500)
Density @ 15°C 0.860 (ASTM D 4052)
Viscosity @ 100oC (cSt) 916.6 (ASTM D 445)
Viscosity @ 40oC (cSt) 10,337 (ASTM D 445)
Viscosity Index 286 (ASTM D 2270)
Flash Point (°C) COC 171 (ASTM D 92)
Boiling Point (°C) >288
Volatiles (% Vol) Nil

Materials Safety Data Sheet
Wynn's Alto Al Humo
WYNN'S
A division of Illinois Tool Works Inc.
1151 West Fifth Street
Azusa, California 91702
EMERGENCY TELEPHONE NUMBER:
Chemtrec (800) 424-9300
INFORMATION TELEPHONE NUMBER:
Wynn's (626) 334-0231

PRODUCT IDENTIFICATION

Product NameWynn's Alto Al Humo
Other Names50807 350 ml
Recommended UseLubricating oil for engines


HAZARDS IDENTIFICATION

Hazard Classification HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. Classified as hazardous according to the criteria of NOHSC. Not classified as a Dangerous Good according to the criteria of the ADG Code.
Risk Phrase R 21 Harmful in contact with skin.
Safety Phrase S 45 In case of accident or if you feel unwell, seek medical advice immediately.


COMPOSITION/INFORMATION ON INGREDIENTS

Pure substances : Not applicable - Mixture
Mixture
Chemical Identity CAS Number Proportion
Hydrotreated heavy paraffinic mineral oil 64742-54-7 30 - 60%
Solvent refined heavy naphthenic mineral oil 64741-96-4 30 - 60%
Other non-hazardous ingredients - < 10%


FIRST AID MEASURES

Ingestion If swallowed, do NOT induce vomiting. Immediately wash out mouth with water, and then give plenty of water to drink. Seek medical attention.
Skin If skin contact occurs, remove contaminated clothing, and flush skin with running water. Wash affected area with soap. If irritation persists, call for medical help.
Eye If in eyes, hold eyelids apart and flush the eye continuously with running water. If irritation persists, call for medical help.
Inhalation Remove person to fresh air to avoid further inhalation.
First Aid Facilities Eye wash station.
Advice to Doctor Treatment should be based on symptoms and clinical condition.
Emesis may be induced under medical supervision.


FIRE FIGHTING MEASURES

Suitable Extinguishing Media Dry chemicals, carbon dioxide, water fog, foam.
Hazards From Combustion Products Thermal decomposition may produce oxides of carbon, sulphur, nitrogen, phosphorus, zinc and sodium.
Precautions For Fire Fighters Use water to cool fire-exposed containers. Combustion will produce smoke and toxic fumes.
Special Protective Equipment Fire fighters to wear a self contained breathing apparatus.
Hazchem Code None allocated.


ACCIDENTAL RELEASE MEASURES

Emergency Procedures Contain spill which may be slippery. Remove all sources of ignition. Increase ventilation.
Methods and Materials for Containment and Clean Up Procedures Use absorbent sand, clay or vermiculite. Shovel into containers. Prevent liquid from entering into sewers and waterways. Dispose of in accordance with Federal, State and Local regulations.


HANDLING AND STORAGE

Precautions for Safe Handling Keep containers closed. Keep out of reach of children. Avoid skin and eye contact.
Conditions for Safe Storage Store in cool, well ventilated area. Combustible. Avoid heat, open flame and strong oxidising agents.


EXPOSURE CONTROLS/PERSONAL PROTECTION

National Exposure Standards
Name ES-TWA ES-STEL ES-Peak
None established for product - - -
Mineral Oil Mist 5 mg/m³ 10 mg/m³ -
Alternative Standards Petroleum Oil Mist
OSHA (PEL) 5mg/m3
ACGIH (TLV-TWA) 5mg/m3

Exposure Standard means the average concentration of a particular substance in the worker’s breathing zone, exposure to which, according to current knowledge, should not cause adverse health effects nor cause undue discomfort to nearly all workers.
Biological Limit Values No biological limit allocated.
Engineering Controls For normal use, no ventilation is required. Use in a normal ventilated area.
Personal Protective Equipment
Respiratory Protection For normal use, none required.
Eye / Face Protection Safety glasses.
Skin Protection PVC or Nitrile gloves. Rubber, plastic gloves.
Thermal Hazards None allocated.


PHYSICAL AND CHEMICAL PROPERTIES

Appearance Clear thick light amber liquid
Odour Mild petroleum
pH Value Not applicable
Vapour Pressure Not available
Vapour Density Not available
Boiling Point/Range >288°C
Freezing Point -12°C
Melting Point Not applicable
Solubility None in water
Density 0.865 @ 15°C
Flash Point 196°C (COC)
Flammable Limits Not available
Ignition Temperature Not available
Viscosity 5,446 cSt @ 40°C
523 cSt @ 100°C


STABILITY AND REACTIVITY

Chemical Stability Stable
Conditions to Avoid Heat, open flame.
Incompatible Materials Strong oxidising agents.
Hazardous Decomposition Products Thermal decomposition may produce oxides of carbon, sulphur, nitrogen, phosphorus, zinc and sodium.
Hazardous Reactions Polymerization will not occur.


TOXICOLOGICAL INFORMATION

This material has not been identified as a carcinogen by NTP, IARC OR OSHA. Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1920.1000(z) and 29 CFR 1910.1200.

Acute Health Effects
Ingestion
May cause irritation to the digestive tract.

Inhalation
If swallowed, may cause slight irritation to digestive tract. Signs and symptoms are discomfort, nausea, vomiting.

Eye
Will cause irritation to the eyes on direct contact, symptoms include redness and blurred vision.
Skin
May absorb on prolonged contact. Can cause irritation to skin. Prolonged contact causes redness, defatting of skin to sensitive individuals.

Chronic Health Effects
Skin
Prolonged and repeated contact with skin, will cause skin irritation, defatting of skin and redness.


ECOLOGICAL INFORMATION

Ecotoxicity No ecotoxicological classifications.
No ecotoxicological classifications.

Persistence/ Degradability Not available.
This product is inherently biodegradable.

Mobility
Not available.


DISPOSAL CONSIDERATIONS

Disposal Methods
Dispose of waste according to Federal, EPA, State and Local regulations. Assure conformity with all applicable regulations.

Special Precautions for Landfill or Incineration
Material suitable for disposal by incineration or landfill through an approved agent.


TRANSPORT INFORMATION

UN Number None allocated.
Proper Shipping Name Not applicable.
Class and Subsidiary Risk Not applicable.
Packing Group Not applicable.
Special Precautions for User Not applicable.
Hazchem Code None allocated


REGULATORY INFORMATION

Poisons Schedule None scheduled.
Hazard Category Harmful / NOHSC : 10005 (1999).


OTHER INFORMATION

Acronyms
ABN Australian Business Number
ACGIH American Conference of Governmental Industrial Hygienists
ADG Australian Dangerous Goods
AICS Australian Inventory of Chemical Substances
AS Australian Standard
CAS Chemical Abstracts Service (USA)
COC Cleveland Open Cup
EPA Environment Protection Agency (Australian States)
IARC International Agency for Research on Cancer
IP Institute of Petroleum (UK)
NIOSH National Institute for Occupational Safety and Health (USA)
NOHSC National Occupational Health and Safety Commission
(Australia)
NTP National Toxicology Program (USA)
NZS New Zealand Standard
OSHA Occupational Safety and Health Administration (USA)
PEL Permissible Exposure Level
PMCC Pensky - Martens Closed Cup
SCBA Self-Contained Breathing Apparatus
STEL Short Term Exposure Limit
SUSDP Standard for the Uniform Scheduling of Drugs and Poisons
(Australia)
TLV Threshold Limit Valve
TWA Time Weighted Average
UN United Nations

Abbreviations
cP centiPoise
cSt centiStoke
g gram
Hg Mercury
kPa kiloPascal
L litre
m3 cubic metre
mg milligram
mL millilitre
mm millimetre
°C degrees of temperature in Celsius (Centigrade)
% percent(age)

Note
This form has been prepared in accordance with the National Code of Practice for the Preparation of Material Safety Data Sheets 2nd Edition [NOHSC:2011 (2003)] issued by the National Occupation Health and Safety Commission April 2003. All information contained in this form is as accurate as possible at the time of issue. The data contained herein is not to be taken as an expressed or implied warranty or representation, for which Wynn's Australia Pty Ltd assumes legal responsibility. No responsibility for damages resulting from use of the information are given, other than those implied mandatorily by Federal or State Government Legislation.