GarraLube 903

  • Suspends water
  • Cleans and lubricates injectors
  • Lubricates pump
  • Supplements dispersancy of engine oil
  • Dispersancy of insoluble gum which can occur during fuel storage
  • Protects against corrosion
  • Low temperature flow improvement through wax crystal modification
  • Greater fuel efficiency
  • Extended service life
  • Minimum maintenance
  • Maximum power
  • Minimum emissions
  • Operational dependability

Packaging

5 Litres, 20 Litres

GarraLube 903 Superior Diesel Fuel Additive

GarraLube 903 Superior Diesel Fuel Additive is the fuel conditioner of the future. It responds to the new set of demands created by new low sulphur fuels, as well as, satisfying the needs of previous fuel related problems.

GarraLube 903 Superior Diesel Fuel Additive not only helps to stabilize the fuel but also increases engine life and power by: keeping the internal parts of the engine cleaner, aiding combustion, neutralizing acids and holding carbon, varnish and gum in suspension. It suppresses tendencies for icing and corrosion caused by water.

GarraLube 903 Superior Diesel Fuel Additive has properties that will benefit your engine in many ways and provides the following benefits:

  • Reduces fuel consumption
  • Aids cold fuel flow and filterability
  • Reduces diesel fuel pour point
  • Keeps injections cleaner
  • Controls smoking
  • Protects against deposits
  • Reduces valve sticking and provides
  • upper cylinder lubrication
  • Neutralizes harmful engine acids
  • Increases horsepower output
  • Provides lubricity agents for low sulfur fuel
  • Increases pump and injector life
  • Improves overall engine performance
  • Reduces / eliminates slime associated with prolonged storage

Although improvements have been made in fuel refining techniques during recent years, there is still a degree of inconsistencies in the fuels that are available. Because of this fact, fuels treated with a fuel stabilizer and conditioner like GarraLube 903 Superior Diesel Fuel Additive give year round improved performance, decrease fuel consumption and extend engine life.

Key Benefits

  • Greater fuel efficiency
  • Extended service life
  • Minimum maintenance
  • Maximum power
  • Minimum emissions
  • Operational dependability

Features

  • Suspends water
  • Cleans and lubricates injectors
  • Lubricates pump
  • Supplements dispersancy of engine oil
  • Dispersancy of insoluble gum which can occur during fuel storage
  • Protects against corrosion
  • Low temperature flow improvement through wax crystal modification
  • Greater fuel efficiency
  • Extended service life
  • Minimum maintenance
  • Maximum power
  • Minimum emissions
  • Operational dependability

Application

APPLICATION MIXING RATIO
Diesel Fuel 1 : 2.000
Industrial Diesel Oil (IDO), Marine Fuel Oil (MFO), Residue 1 : 1.500 - 2.000
  
SPECIAL APPLICATIONS MIXING RATIO
Boilers 1 : 4.000 - 6.000
Generating Sets 1 : 3.000 - 4.000


Technical Data

TYPICAL ANALYSIS
Viscosity @ 40°C, cSt 21.7
Viscosity @ 100°C, cSt 3.75
Viscosity @ 100°F, SUS 114.0
Viscosity @ 210°F, SUS 38.9
Viscosity Index 17
Flash Point, °F 145
Pour Point, °F -42
API Gravity 24.6

Materials Safety Data Sheet

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT: GARRALUBE 903 SUPERIOR DIESEL FUEL ADDITIVE
PRODUCT DESCRIPTION: BASE OIL AND ADDITIVES
PRODUCT CODE: 903
INTENDED USE: DIESEL FUEL ADDITIVE
COMPANY IDENTIFICATION:
PT GAPURA RAYA
Jl. Bangka Raya No. 4, Pela Mampang
Jakarta 12720, Indonesia
Phone : (62-21) 7179 0740


SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS

COMPONENT CAST NUMBER TLV/PEL (mg/M3) WEIGHT %
NAPHTHENIC OIL MIXTURE 5 (AS OILIST) > 97
Proprietary Additives MIXTURE NE < 2

The specific chemical names and composition of the components not disclosed is confidential business information and is withheld as permitted by 29CFR 1910.1200 and various state Right-to-Know laws.

This material is not known to contain any chemical listed as a carcinogen or suspected carcinogen by OSHA Hazard Communication Standard 29CFR 1910.1200, IARC, or the National Toxicology Program (NTP) at a concentration greater than 0.1%.



SECTION 3: PHYSICAL AND CHEMICAL PROPERTIES

Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for additional data.

GENERAL INFORMATION
Physical State: Liquid
Color: Slight Yellow
Odor: Slight petroleum odor
Odor Threshold: None

IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION
Relative Density (at 15 C): 0.90
Flashpoint (Cleveland Open Cup): > 290F (> 145C)
Flammable Limits (Approximate volume% in Air): LEL: ND UEL: ND
Autoignition Temperature: NE
Boiling Point / Range: NE
Vapor Density (Air = 1): < 1 mm
Vapor Pressure, mmHg at 25C: < 1 mm
Evaporation Rate (n-butyl acetate = 1): Negligible
pH: NE
Log Pow (n-Octanol/Water Partition Coefficient): ND
Solubility in Water: Negligible
Viscosity: 21 cSt (21 mm2/sec) at 40C / 3.8 cSt (3.8 mm2/sec) at 100C
Oxidizing Properties: See Section 3, 15, 16.

OTHER INFORMATION
Freezing Point: NE
Melting Point: NE
Pour Point: -42C ( 0 F)
DMSO Extract (mineral oil only), IP-346: < 3% wt


SECTION 4: FIRE AND EXPLOSION DATA

Flashpoint (Cleveland Open Cup): 405F
Autoignition Temperature: NE
Fire Extinguishing Agents: Water Spray (fog), dry chemical, foam, halon, or carbon dioxide. Water stream may splash burning liquid and spread fire.
Special Fire Fighting Procedures: As for petroleum products. Do not use direct or heavy water stream to fight fire. Use self-contained breathing apparatus to fight fires.


SECTION 5: FIRST AID

Contact with EYES: Immediately flush with large quantities of cool water for at least 15 minutes. Get medical attention.
Contact with SKIN: Toxicity (Rabbit): LD50 > 2000 mg/kg. Minimally Toxic. Based on review of components.
Inhalation: Toxicity (Rat): LC 50 > 5000 mg/m3. Minimally Toxic. Based on review of components.
Ingestion: Toxicity (Rat): LC 50 > 2000 mg/kg. Minimally Toxic. Based on review of components.


SECTION 6: REACTIVITY

Reactivity: Stable under normal temperatures and pressures.
Incompatibilities: Strong oxidizing agents, heat, open flame.
Hazardous Polymerization: Des not occur.


SECTION 7: SPECIAL PROTECTION INFORMATION

Ventilation (Local, Mechanical, Special):Use in a well ventilated area with local exhaust ventilation.
Respiratory Protection: None required in normal use. Use only NIOSH/MSHA Organic vapor approved equipment if necessary.
Gloves: Not required in normal use.
Eye Protection: Not required in normal use.
Other Protective Equipment: Practice good personal hygiene. Wash hands after use and handling.


SECTION 8: ENVIRONMENTAL PROCEDURES

Spills or Leaks: Contain any spills with absorbents to prevent migrations and entry into sewers or streams. Take up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil.
Waste Disposal: To the best of Gapura Raya knowledge this product is not regulated by CERCLA/RCRA as a hazardous waste or material. However, this product has not been tested for the toxicity characteristic via the Toxicity Characteristic Leaching Procedure. Therefore, it may be disposed of as an industrial waste in a manner acceptable to good waste management practice and in compliance wit applicable local, state, and federal regulations.
Right-to-Know: None
TSCA: This material is in compliance with the Toxic Substances Control Act (15USC2601-2629)


SECTION 9: STORAGE AND HANDLING

Keep containers sealed until ready for use. Avoid excessive long-term storage temperatures to prolong shelf life. Maximum storage temperature: 120F. Store in well ventilated areas.



SECTION 10: TRANSPORT

D.O.T. Shipping Name: Not Regulated
D.O.T. I.D. Number: NA
Reportable Quantity: NA
Freight Classification: NA
UN Hazard Class: NA
Special Transportation Notes: None

Notes:
NA = Not Applicable NE = Not Established
Hazardous Polymerization: Does not occur.

NE = Not Established, ND = Not Determined, NA = Not Applicable

THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:
No Revision information is available.
Revision Date: August 28th, 2010
Supersedes: Any previous versions
Prepared by: Robert Darmago

PT GAPURA RAYA. believes that the information and recommendations contained herein (including data and statements) are accurate as of the date hereof.

No warranty of fitness, warranty of merchantability or any other warranty, expressed or implied, is made concerning the information provided herein.

The information provided herein relates only to the specific product designated and may not be valid where such product is used in combination with any other materials or process.

Further, since the conditions and methods of use of this product and of the information referred to herein are beyond the control of PT GAPURA RAYA.

PT GAPURA RAYA. expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information.