Garralube 690

Meets requirements of :
  • API GL-5 service classification
  • API MT-1
  • SAE J2360
  • MIL-2105E

Uses

  • Gears
  • Differentials
  • Manual Transmissions

Packaging

5 Litres

GarraLube 690 Automotive Gear Oil

GarraLube 690 Automotive Gear Oil is a multi-purpose type gear lubricant whose high performance level is obtained using a sulfur-phosphorus additive treatment. The selected additives provide extreme pressure properties to protect automotive gears, which may be operated under the most severe service conditions encountered in passenger cars, truck farm tractors, earth moving, construction and other heavy-duty equipment. These additives specifically supply anti-scuff, anti-weld and anti-wear properties necessary in heavy-duty service gear lubricants.

API SERVICE CLASSIFICATIONS: GL-5 690 AUTOMOTIVE GEAR OIL is blended to meet the multi-grade viscosity requirements. These gear lubricants are formulated with naturally High VI solvent-refined base oils and thus do not require viscosity index improvers to meet multi-grade viscometric properties of grades offered. Because these lubricants do not contain VI improvers, they will maintain their viscometric properties throughout their useful life and will not lose viscosity through shear.

VISCOSITY GRADES AVAILABLE: SAE 80W-90 grade for use at temperatures around -20 degrees SAE 85W-140 grade for use at temperatures around -10 degrees Equipment manufacturers' recommendations should always be followed when the gear lubricant is subject to high temperatures. While some gear sets are designed for year-round operation using an SAE 80W-90, others may require SAE 85W-140 for high temperature operation during the hot weather months.

GarraLube 690 Automotive Gear Oil meets performance requirements of military specification MIL-PRF-2105 and is designated for the highest severity of gear service, API service classification GL-5. Also, it meets Mack trucks GO-J specification requiring a thermally stable MIL-PRF-2105 gear oil with limited slip additive.

GarraLube 690 Automotive Gear Oil is recommended for the following applications: In conventional (manual) type transmissions, differentials, final drives (except worm drives), and other gear cases of heavy trucks, buses and farm tractors where extreme pressure, hypoid or multi-purpose gear oils are specified by the equipment manufacturer. Also, this product may be used to passenger car limited slip axles.

Oil Change

GarraLube 690 Automotive Gear Oil is recommended to be changed every 200,000 km for differentials and transmissions (vol 2 - 6 litres).

Features

Meets requirements of :
  • API GL-5 service classification
  • API MT-1
  • SAE J2360
  • MIL-2105E

Technical Data

SAE Grade 80W90 85W140
Viscocity @ 40C, cSt 157 353
Viscocity @ 100C, cSt 15.3 25.4
Viscocity @ 100F, SUS 825 1880
Viscocity @ 210F, SUS 81 126
Viscocity Index 98 98
Flash Point, F 485 535
Pour Point, F -15 5
API Gravity 25.6 23.8
Timken OK, LBS 60 60
4 Ball Weld & LWI 250 250

Materials Safety Data Sheet

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT: GARRALUBE 690 AUTOMOTIVE GEAR OILS
PRODUCT DESCRIPTION: Base Oil and Additives
PRODUCT CODE: 690
INTENDED USE: Gear Oil/Lubricant

COMPANY IDENTIFICATION:
PT GAPURA RAYA
Jl. Bangka Raya No. 4, Pela Mampang
Jakarta 12720, Indonesia
Phone : (62-21) 7179 0740

SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS

COMPONENTCAS NUMBERTLV/PEL (mg/M3)WEIGHT %
Highly Refined Paraffinic Oil Mixture 5 (As Oil Mist) > 95
Proprietary Additives MixtureNE < 5

The specific chemical names and composition of the components not disclosed is confidential business information and is withheld as permitted by 29CFR 1910.1200 and various state Right-to-Know laws.

SECTION 3: HAZARD IDENTIFICATION

This material is not considered to be hazardous according to regulatory guidelines. (See Section 15)

POTENTIAL HEALTH EFFECTS
Excessive exposure may result in eye, skin or respiratory irritation. Low order of toxicity. High-pressure injection under skin may cause serious damage.

NFPA Rating: Flammability: 1, Reactivity: 0, Health: 0
HMIS Rating: Flammability: 1, Reactivity: 0, Health: 0

NOTE: This material should not be used for any other purpose than the intended use listed in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks, which may vary from person to person.

SECTION 4: FIRST AID MEASURES

EYE CONTACT: Immediately flush with large quantities of cool water for at least 15 minutes. Get medical attention.
SKIN CONTACT: Wash off with soap and water.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Get medical attention.
INGESTION: Do NOT induce vomiting. Get medical attention.

SECTION 5: FIRE AND EXPLOSION DATA

EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Water Spray (fog), dry chemical, foam, halon, or carbon dioxide.
Inappropriate Extinguishing Media: Water stream may splash burning liquid and spread fire.

FIRE FIGHTING
Fire Fighting Procedures: Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers or drinking water supply. Fire fighters should use self-contained breathing apparatus (SCBA) to fight fires. Use water spray to cool fire exposed surfaces and to protect personnel.
Hazardous Combustion Products: Aldehydes, Incomplete combustion products, Smoke, Fume, Sulfur oxides, oxides of carbon.

FLAMMABILITY PROPERITES
Flashpoint (Cleveland Open Cup): > 425F (> 218C)
Flammable Limits (Approximate volume% in Air): LEL: NA UEL: NA
Auto-ignition Temperature: NE

SECTION 6: ACCIDENTAL RELEASE MEASURES

NOTIFICATION PROCEDURE
Contain any spills with absorbents to prevent migrations and entry into sewers or streams. Take up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil.

SPILL MANAGEMENT
Land Spill: Contain any spills with absorbents to prevent migrations and entry into sewers or streams. Take up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil.
Water Spill: Confine the spill immediately with booms. Stop leak, if you can do so without risking personal safety. Report spills as required to appropriate authorities. Remove from the surface by skimming or with suitable absorbents.

ENVIRONMENTAL PRECAUTIONS
Large spills should be diked for later recovery or disposal. Spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil. To the best of P.T. Gapura Raya knowledge this product is not regulated by CERCLA/RCRA as a hazardous waste or material. However, this product has not been tested for the toxicity characteristic via the Toxicity Characteristic Leaching Procedure. Therefore, it may be disposed of as an industrial waste in a manner acceptable to good waste management practice and in compliance with applicable local, state, and federal regulations.


SECTION 7: HANDLING AND STORAGE

HANDLING
Avoid contact with skin. Prevent spills and leaks to avoid slipping hazards.

STORAGE
Keep containers sealed until ready for use. Avoid excessive long-term storage temperatures to prolong shelf life. Maximum storage temperature: 120F. Store in well ventilated areas.

SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION INFORMATION

Exposure limits/standards for materials that can be formed when handling this product: When mists/aerosols can occur, the following are recommended: 5 mg/m3 - ACGIH TLV, 10mg/m3 - ACGIH STEL, 5 mg/m3 - OSHA PEL
ENGINEERING CONTROLS
The level pf protection and types of control necessary will vary depending upon potential exposure conditions. Under normal conditions, no special control required when used in a well-ventilated area with local exhaust ventilation.
PERSONAL PROTECTION
Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage.
Respiratory Protection: None required in normal use. Use only NIOSH/MSHA Organic vapor approved equipment if necessary.
Hand Protection: Chemical resistant gloves are recommended. No protection is required in normal use.
Eye Protection: Goggles or safety glasses with side shields are recommended.
Skin and Body Protection: Chemical / oil resistant clothing if contact with material is likely. NO skin protection is ordinarily required under normal conditions of use.
Special Hygiene Measures: Practice good personal hygiene. Wash hands after use and handling.
ENVIRONMENTAL CONTROLS
See Section 6, 7, 12, 13.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for additional data.

GENERAL INFORMATION
Physical State: Liquid
Odor:Slight petroleum odor
Odor Threshold: None
IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION
Relative Density (at 15 C): 0.90
Flashpoint (Cleveland Open Cup): > 425F (> 218C)
Flammable Limits (Approximate volume% in Air): LEL: NA UEL: NA
Autoignition Temperature: NE
Boiling Point / Range: NE
Vapor Density (Air = 1): < 1 mm
Vapor Pressure, mmHg at 25C: < 1 mm
Evaporation Rate (n-butyl acetate = 1): Negligible
pH: NE
Log Pow (n-Octanol/Water Partition Coefficient): ND
Solubility in Water: Negligible
Viscosity: > 45 cSt ( > 45 mm2/sec) at 40C / > 6.6 cSt (> 6.6 mm2/sec) at 100C
Oxidizing Properties: See Section 3, 15, 16.
Other Information
Freezing Point: NE
Melting Point: NE
Pour Point: < -30C (< -22F)
DMSO Extract (mineral oil only), IP-346: < 3% wt

SECTION 10: STABILITY AND REACTIVITY

STABILITY: Stable under normal temperatures and pressures
CONDITIONS TO AVOID: Excessive heat. Sources of ignition.
MATERIALS TO AVOID: Strong oxidizing agents, heat, open flame.
Hazardous Decomposition Products: Does not decompose at ambient temperatures.
Hazardous Polymerization: Does not occur.

SECTION 11: TOXICOLOGICAL INFORMATION

ACUTE TOXICITY
Inhalation:
Toxicity (Rat): LC 50 > 5000 mg/m3. Minimally Toxic. Based on review of the components.

Ingestion:
Toxicity (Rat): LD50 > 2000 mg/kg. Minimally Toxic. Based on review of the components.

Skin:
Toxicity (Rabbit): LD50 > 2000 mg/kg. Minimally Toxic. Based on review of the components.

Eye:
May cause mild, short-lasting discomfort to eyes. Based on review of the components.

CHRONIC/OTHER EFFECTS

Severely refined base oil: Not carcinogenic in animal studies. Dermal and inhalation studies showed minimal effects; lung non-specific infiltration of immune cells, oil deposition and minimal granuloma formation. Not sensitizing in test animals.

The following ingredients are cited on the lists below: None

NTP CARC, NTP SUS, IARC 1, IARC 2A, IARC 2B, OSHA CARC This material is not known to contain any chemical listed as a carcinogen or suspected carcinogen by OSHA Hazard Communication Standard 29CFR 1910.1200, IARC, or the National Toxicology Program (NTP) at a concentration greater than 0.1%.


SECTION 12: ECOLOGICAL INFORMATION

ECOTOXICITY
Material - Not expected to be harmful to aquatic organisms.

MOBILITY
Base oil component - Low solubility and float and is expected to migrate from water to the land. Expected to partition to sediment and wastewater solids.

PERSISTENCE AND DEGRADABILITY
Biodegradation: Base oil component – Expected to be inherently biodegradable.

SECTION 13: DISPOSAL INFORMATION

Disposal recommendations based on material as supplied. Therefore, it may be disposed of as an industrial waste in a manner acceptable to good waste management practice and in compliance with applicable local, state, and federal regulations.
DISPOSAL RECOMMENDATIONS
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.
REGULATORY DISPOSAL INFORMATION
To the best of PT GAPURA RAYA knowledge, this product is not regulated by CERCLA/RCRA as a hazardous waste or material. However, this product has not been tested for the toxicity characteristic via the Toxicity Characteristic Leaching Procedure. Empty Container Warning: Do not attempt to refill or clean containers since residue is difficult to remove. Empty drums should be completely drained, properly bunged and returned to a drum re-conditioner. All containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations.

SECTION 14: TRANSPORT INFORMATION

LAND-DOT: Not Regulated for Land Transportation LAND-TDG: Not Regulated for Land Transportation SEA-IMDG: Not Regulated for Sea Transport AIR-IATA: Not Regulated for Air Transport

SECTION 15: REGULATORY INFORMATION

OSHA Hazard Communication Standard: When used for its intended purposes, this material is not classified as hazardous in accordance with OSHA 29 CFR 1910.1200.

WHMIS: Not a controlled product

Chemical Inventory Listing: TSCA, CEPA

EPCRA: This material contains no extremely hazardous substances.

SARA (311/312) Reportable Hazard Categories: None

SARA (313) Toxic Release Inventory: This material contains no chemicals subject to the supplier notification requirements of the SARA 313 Toxic Release Program

TSCA: This material is in compliance with the Toxic Substances Control Act (15USC2601-2629)


SECTION 16: OTHER INFORMATION

NE = Not Established, ND = Not Determined, NA = Not Applicable

THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:
No Revision information is available.

Revision Date: August 2rd, 2010

Supercedes: Any previous versions

Prepared by: Robert Darmago

PT GAPURA RAYA. believes that the information and recommendations contained herein (including data and statements) are accurate as of the date hereof.
No warranty of fitness, warranty of merchantability or any other warranty, expressed or implied, is made concerning the information provided herein.
The information provided herein relates only to the specific product designated and may not be valid where such product is used in combination with any other materials or process.
Further, since the conditions and methods of use of this product and of the information referred to herein are beyond the control of PT GAPURA RAYA.
PT GAPURA RAYA. expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information.