Wynn’s Oil Cleaner

  • Protect against contamination of new oil by old oil left in the crankcase at oil change
  • Help remove crankcase deposits
  • Help reduce oil consumption resulting from blocked oil drain return holes
  • Remove sludge and varnish deposits
  • Help remove harmful contaminants
  • Help dissolve old highly oxidized oil and provides protection during the cleansing process
  • Help new oil protect the engine longer

Packaging


11 OZ

Wynns Oil System Cleaner & Conditioner

Wynn’s Oil System Cleaner & Conditioner safely dissolves and suspends engine oil deposits throughout the engine. from the valves to the oil pan. Optimum lubrication is provided for with this non-solvent based formula that includes extreme pressure lubrication agents. These agents are metal conditioners that provide additional anti wear protection from metal-to-metal contact during the cleaning operation

Formulated to:

  • Protect against contamination of new oil by old oil left in the crankcase at oil change
  • Help remove crankcase deposits
  • Help reduce oil consumption resulting from blocked oil drain return holes
  • Remove sludge and varnish deposits
  • Help remove harmful contaminants
  • Help dissolve old highly oxidized oil and provides protection during the cleansing process
  • Help new oil protect the engine longer

The Problem

Not all the used, contaminated oil is drained during an oil change. Used oil that is left behind is one of the major causes of sludge and harmful varnish deposits that accumulate over time. Many of the oil system flush products on the market can cause more harm than the benefit they provide. Some of these products rely on harsh solvents to dissolve sludge. These solvents break down the lubrication properties of the engine oil during the flush process, leaving the engine unprotected and exposed to these harsh chemicals during the entire flushing period.

The solution

WYNN'S Oil System Cleaner & Conditioner safely dissolves and suspends engine oil deposits throughout the engine, from the valves to the oil pan. Optimum lubrication is provided for with this non-solvent based formula that includes extreme pressure lubrication agents. These agents are metal conditioners that provide additional anti-wear protection from metal-to-metal contact during the cleaning operation. Oil System Cleaner & Conditioner dissolves and thins highly oxidized oil, allowing a more complete drain of the used oil, effectively reducing the contamination of the new oil.

It also removes soft deposits (sludge) and helps reduce oil consumption from blocked or restricted return drain holes in the cylinder head. If left unchecked, this condition could also cause oil starvation, resulting in engine seizure. Use regularly, WYNN'S Oil System Cleaner & Conditioner reduces the accumulation of deposits which over time can block oil lines and screens and restrict proper lubrication.

Features

  • Protect against contamination of new oil by old oil left in the crankcase at oil change
  • Help remove crankcase deposits
  • Help reduce oil consumption resulting from blocked oil drain return holes
  • Remove sludge and varnish deposits
  • Help remove harmful contaminants
  • Help dissolve old highly oxidized oil and provides protection during the cleansing process
  • Help new oil protect the engine longer

Materials Safety Data Sheet

WYNN'S PROFESSIONAL PRODUCTS
OIL SYSTEM CLEANER & CONDITIONER
WYNN'S
A division of Illinois Tool Works Inc.
1151 West Fifth Street
Azusa, California 91702
EMERGENCY TELEPHONE NUMBER:
Chemtrec (800) 424-9300
INFORMATION TELEPHONE NUMBER:
Wynn's (626) 334-0231

PRODUCT IDENTIFICATION

PRODUCT NAME EFFECTIVE DATE Applies to all Wynn's products with the following prefix:
Wynn's Professional Products
Oil System Cleaner & Conditioner
08-30-05 61603, 61607,61610, 61614
CHEMICAL NAME CAS NUMBER
N/A N/A


HAZARDOUS INGREDIENTS

COMMON NAMECHEMICAL NAMECAS NO.OSHA PELACGIH TLV-TWA
Petroleum Hydrocarbon Petroleum Distillate 68476-34-6 Not Established Not Established
Petroleum Hydrocarbon Petroleum Distillate 64741-97-5 Not Established Not Established

Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1910.1000(z) and 29CFR 1910.1200.



PHYSICAL DATA

These data are approximate or typical values and should not be used as precise specifications. Unless otherwise noted values are at 20°C(68°F) and 760 mmHg (1 atm)

Boiling Point/Range 325-700700F (162.8-371°C) Freeze Point -2525°F(-31.6725°C)
Specific Gravity (H20=1) @ 15.625C 0.86 Vapor Pressure (mm Hg) N/D
Vapor Density (Air =1) Heavier Than Air Solubility in Water (%) Disperses
% Volatiles by Volume Negligible Evaporation Rate (Butyl Acetate = 1) N/D
pH (as is) N/D pH (dilute) @ % N/A
Appearance Clear Brown Thin Liquid Odor Hydrocarbon

N/D - Not Determined < = Less Than

N/A - Not Applicable
> = Greater Than


FIRE AND EXPLOSION HAZARD DATA

Flash Point: 47525°F(24625°C) Method Cleveland Open Cup ASTM D-92

Flammable or Explosive Limits (Approximate percent by volume in air)
Lower (LEL) N/D Upper (UEL) N/D

Hazard Class Identification
Flammability 2
Health 2
Reactivity 0
Other -
Hazard Code 0 - Least (insignificant)
1 - Slight
2 - Moderate
3 - High
4 - Extreme
Extinguishing Media
Dry chemicals, carbon dioxide, water spray, foam.

Special Fire Fighting Procedures
Use water only to cool fire exposed containers. Fire fighters wear a self contained breathing apparatus.

Unusual Fire and Explosion Hazards
The material is combustible and may be ignited by heat or flame.


REACTIVITY DATA

Stability
Stable.

Conditions to Avoid
Heat, open flame.

Materials to Avoid
Strong oxidizing agents.

Hazardous Decomposition or Combustion Products
Thermal decomposition may produce oxides of carbon, nitrogen, phosphorus, and zinc.
Hazardous Polymerization Will not occur.


HEALTH HAZARDS/ROUTES OF ENTRY

Signs, Symptoms and Effects of Overexposure
Ingestion (swallowing)May be harmful or fatal if swallowed. Due to its low viscosity, it may enter lungs during swallowing or vomiting. Once in lungs serious damage may occur.
Skin Contact Can be absorbed through skin on prolonged contact. Single contact, no effect likely. Prolonged and repeated contact can result in defatting and drying of the skin. Can cause redness and itching.
Eye Contact May cause irritation, burning, blurred vision and redness.
Inhalation (breathing) Inhalation can cause irritation to nose and throat and upper respiratory tract. Concentrated vapor respiration can cause dizziness, nausea and central nervous system damage.
Other Effects of Prolonged/Repeated Overexposure

This material has not been identified as a carcinogen by NTP, IARC or OSHA. Kidney damage may occur if large quantities are swallowed.


EMERGENCY AND FIRST AID PROCEDURES

Ingestion (swallowing) DO NOT induce vomiting. Call for medical help.
Skin Contact Wash affected area with soap and water. Remove contaminated clothing.
Eye Contact Flush with water for 15 minutes. If irritation persists call for medical help.
Inhalation (breathing) Remove person to fresh air to avoid further inhalation.
Comments NOTE TO PHYSICIANS: Treatment should be based on symptoms and clinical condition.


SPILL OR RELEASE CONTROL PROCEDURES

Steps to be taken in case material is released or spilled
Ventilate area. Avoid breathing of vapors. Remove with inert absorbent.

Waste Disposal Method
Dispose of in accordance with Federal, State and Local regulations.

ENVIRONMENTAL HAZARD (EPA-CWA, SECTION 311)
Spills of this material leading to surface waters where it will cause a sheen must be reported to the National Response Center (800) 424-8802.

EPA Reportable Quantity (RQ), 40CFR302 (CERCLA104)
N/A

EPA Toxic Chemical Release Reporting, 40CFR372(SARA313)
Chemical CAS NO. % in Product
Zinc Compound -1.75


HANDLING AND STORAGE

Handling and Storage Precautions
WARNING: Contains petroleum distillates. Avoid skin and eye contact. Avoid breathing of vapors. Combustible. Keep away from heat and sparks. Use entire contents. DO NOT store opened containers.

Other Precautions
KEEP AWAY FROM CHILDREN.


PERSONAL PROTECTION - EXPOSURE CONTROL

Ventilation
Provide adequate general or local ventilation to maintain concentrations below TLV/PEL limits.

Respiratory Protection
None normally required. If vapors exceed TLV/PEL values, use a NIOSH approved respirator

Eye Protection
Safety glasses with side-shields.

Protective Gloves
Chemical-resistant gloves.

Other Protective Clothing or Equipment
Eye wash station is recommended.

Work/Hygienic Practices
Personal cleanliness is always appropriate. Frequent washing minimizes chances of inadvertent exposure.



TRANSPORTATION INFORMATION

Department of Transportation (DOT) Classification
  Flammable Liquid   Corrosive
  Flammable Solid   Non Flammable Gas
  Flammable Gas   Non Hazardous by DOT
  Combustible Liquid   Other

DOT Proper Shipping Name
N/A

DOT ID Number
N/A


DOCUMENTATION

Product Code No.: 61603, 61607, 61610, 61614
Previous Code No.: 61603, 61607, 61609, 61610, 61611, 61614, 61616, 61629, 61630

Issue Date: 08-30-05
Prior Date: 06-18-04

This information is, to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.