Wynns Air Intake Cleaner (Aerosols)

Wynns Air Intake Cleaner is professionally formulated to safely blast away gum and varnish from air throttle plates and throttle plate shafts. Wynn's Air Intake Cleaner helps restore engine performance, by quickly removing cylinder carbon, gums and varnishes from the air intake components without the need to dismantle.

Introduction

Wynn's Air Intake Cleaner is designed to overcome vehicle deposit problems encountered with today's fuel injected engines operating on unleaded fuel. Engine design changes for better efficiency and lower emissions coupled with typical nonmetallic octane enhancers used in unleaded fuel (e.g. olefins, poly-nuclear aromatics, oxygenates, etc.) lead to increased propensity to form deposits on intake valves, fuel injectors, combustion chambers, and air intake systems.

BMW was a leader in studying problems related to intake valve deposits. Today, many domestic OEM's such as Ford and GM have recognized similar problems. In U.S.A. the Co-operative Research Council is studying solutions to these problems. Air intake is critical to proper engine operation. It must be remembered that engines consume roughly 15 liters of air with each liter of fuel. Proper air intake is disturbed by deposits in the air induction system and on intake valves. Combustion chamber deposits increase a vehicle's octane requirement. Higher octane unleaded fuels use PNA’s, olefins, and/or oxygenates to achieve higher octane values. However, these same components lead to more combustion chamber deposits, and the engines appetite for octane increases further. Octane Requirement Increase (ORI) leads to annoying knocking and pinging (which can cause damage to cylinder heads in extreme situations) and reduced power on demand, particularly in vehicles equipped with knock-sensors that retard spark timing upon sensing knock. Fuel injector flow problems from deposits lead to uneven distribution of fuel and overall performance deteriorates. This has been a field problem since the mid-1980. This combination of fuel system deposits causes poor drive ability, hesitation, stalling, reduced power, poor fuel economy, and poor overall performance. If a regular engine tune-up is performed without addressing fuel system deposits, the customer may not be satisfied with the maintenance performed. World-wide field experience with Wynn's Air Intake Cleaner strongly indicates that its use, either in conjunction with a regular engine tune-up or on its own, provides a significant difference in vehicle performance that the customer can feel, and greatly enhances customer satisfaction with the workshop service performed.

Wynn's Air Intake Cleaner removes and dissolves fuel system deposits found on: intake valves; fuel injectors; air intake systems; manifolds; combustion chambers; and throttle bodies.

Wynn's Air Intake Cleaner can be used either in conjunction with regularly scheduled engine tune ups, or on its own, to restore fuel system-related vehicle drive ability performance, power and acceleration performance, low emissions, optimal fuel economy, and lower octane requirement to improve customer satisfaction.

Advantages

Key Benefits

• Cleans air throttle plates and throttle plate shafts.
• Safely removes gum and varnish deposits.
• Improves air flow for smoother idling.
• Restores fuel economy.
• Lubricates air-intake throttle plates.
• Protects against rust and corrosion.
• Stops engine knock and run-on.
• Reduces exhaust emissions and octane requirement.
• Cleans positive crankcase ventilating valves.
• Assures proper air/fuel ratios.
• Eliminates engine surging, stalling and hesitation.
• Restores lost power.
• Contains no CFC which have been proves to be harmful to the ozone layer.
• Safe for oxygen sensors and catalytic convertors.

Features

• Cleans air throttle plates and throttle plate shafts.
• Safely removes gum and varnish deposits.
• Improves air flow for smoother idling.
• Restores fuel economy.
• Lubricates air-intake throttle plates.
• Protects against rust and corrosion.
• Stops engine knock and run-on.
• Reduces exhaust emissions and octane requirement.
• Cleans positive crankcase ventilating valves.
• Assures proper air/fuel ratios.
• Eliminates engine surging, stalling and hesitation.
• Restores lost power.
• Contains no CFC which have been proves to be harmful to the ozone layer.
• Safe for oxygen sensors and catalytic convertors.

Technical Data

Materials Safety Data Sheet Wynn's Professional Products Air-Intake Cleaner - Aerosol WYNN'S A division of Illinois Tool Works Inc. 1151 West Fifth Street Azusa, California 91702 EMERGENCY TELEPHONE NUMBER: Chemtrec (800) 424-9300 INFORMATION TELEPHONE NUMBER: Wynn's (626) 334-0231 PRODUCT IDENTIFICATION PRODUCT NAME EFFECTIVE DATE PRODUCT CODE Wynn's Professional Products Air Intake Cleaner - Aerosol 12-30-05 60807 CHEMICAL NAME CAS NUMBER N/A N/A HAZARDOUS INGREDIENTS COMMON NAME CHEMICAL NAME CAS NO. OSHA PEL ACGIH TLV-TWA Acetone 2-Propanone 67-64-1 1000 500 ppm Ethylbenzene Ethylbenzene 100-41-4 100 100 ppm Petroleum Distillate Distillates, Petroleum Hydrotreated Light 64742-47-8 5mg/m as mist³ 5mg/m as mist³ Glycol Ether Glycol Ether 770-35-4 None Established None Established Methyl Acetate Methyl Acetate 79-20-9 200 200 ppm Hydrocarbon Propellant Propane 74-98-6 1000 2500 ppm Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1910.1000(z) and 29CFR 1910.1200. PHYSICAL DATA These data are approximate or typical values and should not be used as precise specifications. Unless otherwise noted values are at 20°C(68°F) and 760 mmHg (1 atm). Boiling Point/Range -45°F to 300°F (-43° to 149°C) Freeze Point N/A Specific Gravity (H20=1) @ 15.6°C 0.89 Vapor Pressure (PSIG) 70 Vapor Density (Air =1) Heavier Than Air Solubility in Water (%) 0 % Volatiles by Volume (CARB) ≤45% Evaporation Rate (Butyl Acetate = 1) > 1 pH (as is) N/A pH (dilute) @ % N/A Appearance Yellow liquid Odor Solvent N/D - Not Determined < = Less Than N/A - Not Applicable > = Greater Than FIRE AND EXPLOSION HAZARD DATA Flash Point:-156°F (-105°C) Method Tag Closed Cup Flammable or Explosive Limits (Approximate percent by volume in air) Lower (LEL) N/D Upper (UEL) N/D Hazard Class Identification Flammability 4 Health 2 Reactivity 0 Other - Hazard Code 0 - Least (insignificant) 1 - Slight 2 - Moderate 3 - High 4 - Extreme Extinguishing Media Carbon dioxide, dry chemicals, foam, water fog. Special Fire Fighting Procedures Use water to cool fire exposed containers. Fire fighters wear a self-contained breathing apparatus. Unusual Fire and Explosion Hazards Exposure to heat and direct sunlight may cause cans to burst. DO NOT spray near open flame. REACTIVITY DATA Stability Stable. Conditions to Avoid Heat, open flame. Temperatures above 120°F. Materials to Avoid Strong oxidizing agents, reactive metals. Hazardous Decomposition or Combustion Products Thermal decomposition will produce oxides of carbon. Hazardous Polymerization (conditions) Will not occur. HEALTH HAZARDS/ROUTES OF ENTRY Signs, Symptoms and Effects of Overexposure Ingestion (swallowing) Harmful or fatal if swallowed. Will cause central nervous system depression Skin Contact rritant to skin. Skin contact may produce a burning sensation, redness, defatting of skin. Eye Contact Severe irritant to eyes. Will cause burning of eyes, blurred vision, watery eyes. Inhalation (breathing) Vapors are harmful if inhaled. Irritant to upper respiratory tract. May cause dizziness, nausea, headaches. Other Effects of Prolonged/Repeated Overexposure This material contains a trace amount of chemical that has been identified as a carcinogen by NTP, IARC or OSHA. Vapors in a confined area in high concentrations are anesthetic. Overexposure may result in light headiness, dizziness, nausea. Chronic Effect: Prolonged and repeated over-exposure to solvents may result in permanent brain and nervous system damage. May cause kidney and liver damage. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. EMERGENCY AND FIRST AID PROCEDURES Ingestion (swallowing) DO NOT induce vomiting. Call a physician immediately. Skin Contact ash affected area with soap and water. Remove contaminated clothing. Eye Contact Flush with water for 15 minutes. If irritation persists, call a physician immediately. Inhalation (breathing) Remove person to fresh air to avoid further inhalation. Comments NOTE TO PHYSICIANS: Ingestion or subsequent vomiting can result in aspiration of light hydrocarbon liquid into the lungs, which can cause pneumonitis. SPILL OR RELEASE CONTROL PROCEDURES Steps to be taken in case material is released or spilled Remove all sources of ignition. Ventilate area. Remove with absorbent material. Use non-sparking tools. Put into container. Waste Disposal Method Dispose of in accordance with Federal, State and Local regulations. EPA Reportable Quantity (RQ), 40CFR302 (CERCLA104) Acetone (5000 lbs), Xylene (100 lbs), Ethylbenzene (1000 lbs) EPA Toxic Chemical Release Reporting, 40CFR372(SARA313) Chemical CAS NO. % in Product Xylene 1330-20-7 20-30 Ethylbenzene 100-41-4 1-10 HANDLING AND STORAGE Handling and Storage Precautions DANGER: Extremely flammable. Keep away from heat and flame. Contents under pressure. Vapors harmful. Harmful or fatal if swallowed. Avoid exposure to direct sunlight. Store at room temperature. KEEP OUT OF REACH OF CHILDREN. Other Precautions DO NOT puncture or incinerate. PERSONAL PROTECTION - EXPOSURE CONTROL Ventilation Normal use none required. Explosion proof exhaust is recommended in enclosed area. Respiratory Protection Normal use none required. To prevent overexposure NIOSH approved organic vapor respirator is recommended. Eye Protection Chemical splash goggles with side shield. Protective Gloves Impervious gloves. Other Protective Clothing or Equipment None under normal use. Eye wash station. Work/Hygienic Practices Personal cleanliness is always appropriate. Frequent washing minimizes chances of inadvertent exposure. TRANSPORTATION INFORMATION Department of Transportation (DOT) Classification   Flammable Liquid   Corrosive   Flammable Solid   Non Flammable Gas Flammable Gas   Non Hazardous by DOT   Combustible Liquid   Other DOT Proper Shipping Name Aerosols, flammable. DOT ID Number UN 1950 Note: Consumer Commodity, ORM-D may be used for ground transportation within the USA for cases of 61510, 61517. DOCUMENTATION Product Code No.: 60807 Previous Code No.: 60807 Issue Date: 12-30-05 Prior Date: 03-04-05 This information is, to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.