Wynns Multi Purpose Grease

Wynn's Multi Purpose Grease is a premium NLGI No. 2 grade consistency, lithium soap based grease designed for use in a wide variety of applications. Wynn's Multi-Purpose Grease is formulated with the unique Wynn's Friction Proofing package.

Advantages

Wynn's Multi-Purpose Grease contains the following chemical additives and is formulated to provide the benefits listed under each ingredient.

• Provide high temperature extreme pressure properties to opposing metal components subjected to extreme loads and high temperatures.
• Reduce component wear between opposing surfaces during periods of high temperature loading.
• Extend component life by preventing wear.
• Provide protection over a wide range of operating temperatures under high load conditions.
• Prevent scuffing and galling.

• Extend grease life by reducing oxidation.
• Reduce the formation of high temperature deposits.

• Prevent rust and corrosion of metallic components under humid and wet conditions.
• Extend component life by preventing rust and corrosion.

• Separate opposing metal surfaces, thereby reducing wear.
• Be highly resistant to water washout.
• Have a dropping point in excess of 180°C.
• Be stable over a wide temperature range.
• Resist breakdown as a result of mechanical action.
• Meet the requirements of NLGI grade No. 2.

Features

• Anti wear extreme pressure agents
• Inihibits oxidation
• Inhibits rust and corrosion

Materials Safety Data Sheet Wynn's E.P. Multi-Purpose Grease No. 2 WYNN'S A division of Illinois Tool Works Inc. 1151 West Fifth Street Azusa, California 91702 EMERGENCY TELEPHONE NUMBER: Chemtrec (800) 424-9300 INFORMATION TELEPHONE NUMBER: Wynn's (626) 334-0231 PRODUCT IDENTIFICATION PRODUCT NAME EFFECTIVE DATE PRODUCT CODE Wynn's E.P. Multi-Purpose Grease No.2 11-08-05 50901, 50902, 50904/td> CHEMICAL NAME CAS NUMBER Lithium Based Petroleum Grease N/A HAZARDOUS INGREDIENTS COMMON NAME CHEMICAL NAME CAS NO. OSHA PEL ACGIH TLV-TWA Petroleum Oil Solvent-refined naphthenic distillate 64741-96-4 5 mg/m3 as mist 5 mg/m3 as mist Lithium Soap Octadecenoic acid, 12-hydroxy-,monolithium salt 7620-77-1 Not Established Not Established Zinc Dialkyldi-thiophosphate Zinc Dialkyldithiophosphate 68649-42-3 Not Established Not Established Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1910.1000(z) and 29CFR 1910.1200. PHYSICAL DATA These data are approximate or typical values and should not be used as precise specifications. Unless otherwise noted values are at 20°C(68°F) and 760 mmHg (1 atm). Boiling Point/Range >600°F(>316°C) Freeze Point N/D °F(°C) Specific Gravity (H20=1) @ 15.6°C 0.90-1.00 Vapor Pressure (mm Hg) N/D % Volatiles by Volume Negligible Evaporation Rate (Butyl Acetate = 1) N/D pH (as is) N/A pH (dilute) @ % N/A Appearance Red colored solid grease Odor Hydrocarbon N/D - Not Determined < = Less Than N/A - Not Applicable > = Greater Than FIRE AND EXPLOSION HAZARD DATA Flash Point: >400°F(>204°C)     Method: Cleveland Open Cup ASTM D-92 Flammable or Explosive Limits (Approximate percent by volume in air) Lower (LEL) N/D Upper (UEL) N/D Hazard Class Identification Flammability 1 Health 1 Reactivity 0 Other - Hazard Code 0 - Least (insignificant) 1 - Slight 2 - Moderate 3 - High 4 - Extreme Extinguishing Media Carbon dioxide, dry chemicals, foam, water spray. Special Fire Fighting Procedures Use water to cool fire exposed containers. Fire fighters wear a self-contained breathing apparatus for fire in enclosed area. Unusual Fire and Explosion Hazards None Indicated. REACTIVITY DATA Stability Stable. Conditions to Avoid Elevated temperatures. Materials to Avoid Strong oxidizing agents. Hazardous Decomposition or Combustion Products Thermal decomposition may produce carbon dioxide, carbon monoxide, oxides of sulfur, phosphorus, zinc. Hazardous Polymerization (conditions) Will not occur. HEALTH HAZARDS/ROUTES OF ENTRY Signs, Symptoms and Effects of Overexposure Ingestion (swallowing) May be harmful if swallowed. May cause irritation to the digestive tract. Skin May cause skin irritation as a result of prolonged contact. Eye Contact May cause irritation due to direct contact Inhalation (breathing) Exposure to oil, mist or fumes generated when heating this material may cause irritation to the nose, throat and upper respiratory tract. Other Effects of Prolonged/Repeated Overexposure This material has not been identified as a carcinogen by NTP, IARC or OSHA. Prolonged or repeated contact may cause skin and eye irritation. EMERGENCY AND FIRST AID PROCEDURES Ingestion (swallowing) Give 2-3 cups of water to conscious person. Call a physician immediately. Skin Contact ash with soap and water. Remove contaminated clothing. Eye Contact Flush with water for 15 minutes. If irritation persists call for medical help. Inhalation (breathing) Remove person to fresh air to avoid further inhalation. Comments NOTE TO PHYSICIANS: Treatment should be based on symptoms and clinical condition. SPILL OR RELEASE CONTROL PROCEDURES Steps to be taken in case material is released or spilled Absorb with inert absorbent material. Shovel into waste containers. Prevent product from entering drinking water supplies and sewer. Waste Disposal Method In compliance with all Federal, State, and Local regulations. EPA Reportable Quantity (RQ), 40CFR302 (CERCLA104) N/A EPA Toxic Chemical Release Reporting, 40CFR372(SARA313) Chemical CAS NO. % in Product N/A N/A N/A HANDLING AND STORAGE Handling and Storage Precautions CAUTION: Alkaline liquid. May be harmful if swallowed. Avoid skin and eye contact. Avoid freezing. DO NOT store in opened containers. Use entire contents. Other Precautions KEEP OUT OF REACH OF CHILDREN! PERSONAL PROTECTION - EXPOSURE CONTROL Ventilation None required. Respiratory Protection None required. Eye Protection Safety glasses. Protective Gloves Rubber, plastic gloves. Other Protective Clothing or Equipment Eye wash station. Work/Hygienic Practices Personal cleanliness is always appropriated. Frequent washing minimizes inadvertent exposure. TRANSPORTATION INFORMATION Department of Transportation (DOT) Classification Flammable Liquid Corrosive Flammable Solid Non Flammable Gas Flammable Gas Non Hazardous by DOT Combustible Liquid Other DOT Proper Shipping Name Corrosive Liquid, N.O.S. (Contains Sodium Metasilicate) DOT ID Number UN1760 DOT Packing Group II DOCUMENTATION Product Code No.: 44002, 44004 Previous Code No.: 44002, 44004 Issue Date: 11-02-05 Prior Date: 09-13-99 This information is, to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.