Wynns Supreme Plus Oil Treatment

Formulated to:

• Prevent engine wear
• Retard oil oxidation
• Assure maximum lubrication protection
• Utilize Premium API SM/ILSAC GF-4 additive technology
• Enhance engine performance
• Provide added protection during engine break-in
• Neutralize harmful acids formed by the combustion of blow-by gasses and water
• Protect engine components from rust and corrosive wear
• Compatible with all API service classifications

The Problem

Today's engines are smaller, lighter, have closer tolerances and operate under higher temperatures than engines of the past. These modern engines must not only be fuel efficient and produce low emissions levels, but must also maintain the performance and durability that car owners demand.
At the heart of the engine is its lubrication system, essential to efficiency, performance and durability. Engine oil must perform in the internal engine environment where factors such as heat, pressure and contamination affect not only its performance and useful service life, but the performance and life of the engine itself. Further taxing the engine oil in these harder working engines are external factors such as severe driving conditions, increased driver neglect and extended/ irregular oil change intervals.
The additives contained in even the best engine oils are depleted with use, making the use of supplemental treatments a wise choice for the motorist wanting the most from his or her engine.
A proven engine oil treatment that adds this extra measure of protection to the basic formulation of today's quality motor oil its desperately needed by drivers striving for the utmost in performance, protection and durability

The solution

Wynn's Supreme +Plus+ Oil Treatment is formulated to enhance the lubrication, protection and cleaning properties of engine oil. Supreme +Plus+ helps increase oil life, reduce oil oxidation, thickening and breakdown, combat engine wear, reduce friction and inhibit rust and corrosion.

• DETERGENTS/DISPERSANTS to maintain engine cleanliness by preventing the accumulation of harmful deposits.
• OXIDATION INHIBITORS to retard oil thickening caused by high temperature operation and extended service intervals.
• FRICTION MODIFIERS to reduce friction and increase engine efficiency.
• ANTI-WEAR ADDITIVES to prevent engine wear associated with start-up and severe driving conditions. It will also boost the anti-wear ability of the engine oil which depletes with use.
• RUST AND CORROSION INHIBITORS to neutralize acids formed by combustion by-products and protect engine surfaces from rust resulting from water in the oil due to condensation.

Features

• Prevent engine wear
• Retard oil oxidation
• Assure maximum lubrication protection
• Utilize Premium API SM/ILSAC GF-4 additive technology
• Enhance engine performance
• Provide added protection during engine break-in
• Neutralize harmful acids formed by the combustion of blow-by gasses and water
• Protect engine components from rust and corrosive wear
• Compatible with all API service classifications

Materials Safety Data Sheet Wynn's Professional Products Supreme Plus Oil Supplement WYNN'S A division of Illinois Tool Works Inc. 1151 West Fifth Street Azusa, California 91702 EMERGENCY TELEPHONE NUMBER: Chemtrec (800) 424-9300 INFORMATION TELEPHONE NUMBER: Wynn's (626) 334-0231 PRODUCT IDENTIFICATION PRODUCT NAME EFFECTIVE DATE PRODUCT CODE Wynn's Professional Products Supreme Plus Oil Supplement 12-28-05 64328 CHEMICAL NAME CAS NUMBER N/A N/A HAZARDOUS INGREDIENTS COMMON NAME CHEMICAL NAME CAS NO. % OSHA PEL ACGIH TLV-TWA Petroleum Hydrocarbon Petroleum Oil 64742-58-1 65-75 5 mg/m³ 5 mg/m³ Aromatic Solvent Light Aromatic Solvent Naphtha 64742-95-6 1-5 Not Established Not Established Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1910.1000(z) and 29CFR 1910.1200. PHYSICAL DATA These data are approximate or typical values and should not be used as precise specifications. Unless otherwise noted values are at 20°C(68°F) and 760 mmHg (1 atm). Boiling Point/Range >600°F(315.5°C) Freeze Point 20°F(-6.7°C) Specific Gravity (H20=1) @ 15.6°C 0.90 Vapor Pressure (mm Hg) < 1 Vapor Density (Air =1) >1 Solubility in Water (%) < 0.1 % Volatiles by Volume 0 Evaporation Rate (Butyl Acetate = 1) N/A pH (as is) N/A pH (dilute) @ % N/A Appearance Clear Dark Brown Liquid Odor Mild N/D - Not Determined < = Less Than N/A - Not Applicable > = Greater Than FIRE AND EXPLOSION HAZARD DATA Flash Point 390°F(199°C) Method Cleveland Open Cup ASTM D-92 Hazard Class Identification Flammability 1 Health 2 Reactivity 0 Other - Hazard Code 0 - Least (insignificant) 1 - Slight 2 - Moderate 3 - High 4 - Extreme Extinguishing Media Dry chemicals, carbon dioxide, water fog, foam. Special Fire Fighting Procedures Use Water to cool fire-exposed containers. Fire fighters use a self contained breathing apparatus. Unusual Fire and Explosion Hazards Combustion will produce smoke and toxic fumes. REACTIVITY DATA Stability Stable. Conditions to Avoid Heat, open flame. Materials to Avoid Strong oxidizing agents. Hazardous Decomposition or Combustion Products Thermal decomposition may produce oxides of carbon, sulfur, nitrogen, phosphorus, zinc and sodium. Hazardous Polymerization (conditions) will not occur HEALTH HAZARDS/ROUTES OF ENTRY Signs, Symptoms and Effects of Overexposure Ingestion (swallowing) DO NOT swallow. If swallowed, may cause slight irritation to digestive tract. Signs and symptoms are discomfort, nausea, vomiting. Skin Contact ay absorb on prolonged contact. Can cause irritation to skin. Prolonged contact causes redness, defatting of skin to sensitive individuals. Eye Contact Will cause irritation to the eyes on direct contact, symptoms include redness and blurred vision. Inhalation (breathing) Vapors generated at elevated temperatures can cause irritation to respiratory tract. Other Effects of Prolonged/Repeated Overexposure This material has not been identified as a carcinogen by NTP, IARC or OSHA. Prolonged and repeated contact with skin and eyes will cause skin and eye irritation, defatting of skin and redness. EMERGENCY AND FIRST AID PROCEDURES Ingestion (swallowing) DO NOT induce vomiting. Give 2-3 cups of water or milk. Call for medical help. Skin Contact Wash affected area with soap and water. If irritation persists, call for medical help. Eye Contact lush eyes with water for 15 minutes. If irritation persists, call for medical help. Inhalation (breathing) Remove to fresh air to avoid further inhalation. Comments NOTE TO PHYSICIANS: Treatment should be controlled by symptoms and clinical conditions. Emesis may be induced under medical supervision. SPILL OR RELEASE CONTROL PROCEDURES Steps to be taken in case material is released or spilled Use absorbent sand, clay or vermiculite. Shovel into containers. Prevent liquid from entering into sewers and waterways. Waste Disposal Method Dispose of in accordance with Federal, State and Local regulations. Environmental Hazard (EPA-CWA, Section 311) Spills of this material leading to surface waters where it will cause a sheen must be reported to the National Response Center (800) 424-8802. EPA Reportable Quantity (RQ), 40CFR302 (CERCLA104) N/A EPA Toxic Chemical Release Reporting, 40CFR372(SARA313) Chemical CAS NO. % in Product Zinc compound ----- 0.62 as Zinc HANDLING AND STORAGE Handling and Storage Precautions CAUTION: Contains petroleum oil. Avoid skin and eye contact. DO NOT store opened containers. Use entire contents. Other Precautions KEEP AWAY FROM CHILDREN. PERSONAL PROTECTION - EXPOSURE CONTROL Ventilation Normal use, none required. If misting occurs a mechanical or local exhaust is recommended. Respiratory Protection Normal use, none required. Eye Protection Safety glasses. Protective Gloves Impervious gloves. Other Protective Clothing or Equipment None. Work/Hygienic Practices Personal cleanliness is always appropriate. Frequent washing minimizes chances of inadvertent exposure. TRANSPORTATION INFORMATION Department of Transportation (DOT) Classification   Flammable Liquid   Corrosive   Flammable Solid   Non Flammable Gas   Flammable Gas Non Hazardous by DOT   Combustible Liquid   Other DOT Proper Shipping Name N/A DOT ID Number N/A DOCUMENTATION Product Code No.: 64328 Previous Code No.: 64328 Issue Date: 12-30-05 Prior Date: 11-17-97 This information is, to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use.